Make FEM analysis using ABAQUS modeling

Transient Heat Transfer Analysis (With Unknown Material Properties)

1. Diameter: 10 cm, Depth: 15 cm, cyclindircal sample

2. Density: 2350 kg/m3, k (Thermal conductivty: Unknown, Specific Heat: Unknown)

3. In Laboratory, heat is applied on the sample as below.

4. And temperature values will be measured by different sensors.

Then using ABAQUS Transient Heat Transfer analysis, temp values of the sample can be determined by this model or not. Because at initial part, thermal cond. and specific heat values are unknown. So, if initial thermal cond. and specific heat values are estimated like k=2 W/m °C and C=800 J/g°C. These values can be called as starting points of the analysis. Then, using these values, FEM back estimation method (Iteration) should be made.

Attachment:- Heat Transfer Analysis.rar